xsane (xsane:1243187): Gtk-WARNING **: 16:50:01.307: Загружаемый модуль тем не найден в module_path: «adwaita», MIB search path: /usr/share/snmp/mibs:/usr/share/mibs/net-snmp:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/tubs:/usr/share/mibs/cisco:/usr/share/pibs/ietf:/usr/share/pibs/tubs: Cannot find module (NET-SNMP-AGENT-MIB): At line 0 in (none) Cannot find module (SNMPv2-MIB): At line 0 in (none) Cannot find module (IF-MIB): At line 0 in (none) Cannot find module (IP-MIB): At line 0 in (none) Cannot find module (TCP-MIB): At line 0 in (none) Cannot find module (UDP-MIB): At line 0 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 0 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 0 in (none) Cannot find module (EtherLike-MIB): At line 0 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 0 in (none) Cannot find module (IPV6-ICMP-MIB): At line 0 in (none) Cannot find module (IPV6-MIB): At line 0 in (none) Cannot find module (IPV6-TCP-MIB): At line 0 in (none) Cannot find module (IPV6-UDP-MIB): At line 0 in (none) Cannot find module (UCD-IPFWACC-MIB): At line 0 in (none) Cannot find module (SNMP-TARGET-MIB): At line 0 in (none) Cannot find module (TUNNEL-MIB): At line 0 in (none) Cannot find module (IPV6-FLOW-LABEL-MIB): At line 0 in (none) Cannot find module (UCD-DISKIO-MIB): At line 0 in (none) Cannot find module (LM-SENSORS-MIB): At line 0 in (none) Cannot find module (UCD-SNMP-MIB): At line 0 in (none) Cannot find module (UCD-DEMO-MIB): At line 0 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 0 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none) Cannot find module (IP-FORWARD-MIB): At line 0 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none) Cannot find module (SNMP-MPD-MIB): At line 0 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none) Cannot find module (SNMPv2-TM): At line 0 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 0 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 0 in (none) Cannot find module (UCD-DLMOD-MIB): At line 0 in (none) (xsane:1243187): Pango-WARNING **: 16:50:09.580: Invalid UTF-8 string passed to pango_layout_set_text() (xsane:1243187): Pango-WARNING **: 16:50:09.628: Invalid UTF-8 string passed to pango_layout_set_text() Сканер Epson M3170. При этом утилита сканирования от производителя работает прекрасно. В xsane на p9 вероятно есть регрессия, и, судя по проверенным моделям и сообщениям на форуме, большое число бэкэкндов приводят теперь к ошибке сегментации. Также ненормально, что теперь нужно комментировать плагин net в /etc/sane.d/dll.conf, чтобы работать с USB-сканерами, раньше такого не было. На регрессию указывает и то, что в p8 те же сканеры работают, в том числе с проприетарными плагинами.
Надеюсь не идёт речь о проприетарном драйвере ?
(Ответ для Константин Палачев на комментарий #0) > xsane [...] > > Сканер Epson M3170. > При этом утилита сканирования от производителя работает прекрасно. > > В xsane на p9 вероятно есть регрессия, и, судя по проверенным моделям и > сообщениям на форуме, большое число бэкэкндов приводят теперь к ошибке > сегментации. [...] Если несложно, хотя бы пару-тройку бэкендов приведите, чтобы было с чего начать.
В приведенном примере драйвер сканирования от производителя. Но суть проблемы в том, что при прочих равных условиях на 8 платформе xsane работает, а на 9 не работает. Регрессию можно увидеть например на офисном МФУ HP M426fdn При подключении Ноутбука с Альт 8 СП (по USB) xsane работает. При подключении Альт рабочая станция 9 не работает. Альт 8 СП (9 платформа) не работает.
(Ответ для Константин Палачев на комментарий #3) > > Регрессию можно увидеть например на офисном МФУ HP M426fdn > > При подключении Ноутбука с Альт 8 СП (по USB) xsane работает. > При подключении Альт рабочая станция 9 не работает. > Альт 8 СП (9 платформа) не работает. Покажите вывод sane-find-scanner и scanimage -L лучше, если с обеих платформ.
NAME="ALT SPWorkstation" VERSION="8.0 (cliff)" ID=altlinux VERSION_ID=8.0 PRETTY_NAME="ALT 8 SP Workstation (cliff)" ANSI_COLOR="1;33" CPE_NAME="cpe:/o:alt:spworkstation:8.0" HOME_URL="http://altsp.su" BUG_REPORT_URL="https://bugs.altlinux.org/" sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x5a2a [HP LaserJet MFP M426fdn]) at libusb:001:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. scanimage -L device `hpaio:/usb/HP_LaserJet_MFP_M426fdn?serial=PHBLK7J3T1' is a Hewlett-Packard HP_LaserJet_MFP_M426fdn all-in-one device `hpaio:/net/HP_LaserJet_MFP_M426fdn?ip=10.4.129.139' is a Hewlett-Packard HP_LaserJet_MFP_M426fdn all-in-one Все работает. В следующем сообщении приведу вывод с Альт рабочая станция 9.
NAME="ALT Workstation" VERSION="9.0" ID=altlinux VERSION_ID=9.0 PRETTY_NAME="ALT Workstation 9.0 (Laertes)" ANSI_COLOR="1;33" CPE_NAME="cpe:/o:alt:workstation:9.0" HOME_URL="https://basealt.ru/" BUG_REPORT_URL="https://bugs.altlinux.org/" sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x5a2a [HP LaserJet MFP M426fdn]) at libusb:001:004 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. scanimage -L MIB search path: /usr/share/snmp/mibs:/usr/share/mibs/net-snmp:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/tubs:/usr/share/mibs/cisco:/usr/share/pibs/ietf:/usr/share/pibs/tubs: Cannot find module (NET-SNMP-AGENT-MIB): At line 0 in (none) Cannot find module (SNMPv2-MIB): At line 0 in (none) Cannot find module (IF-MIB): At line 0 in (none) Cannot find module (IP-MIB): At line 0 in (none) Cannot find module (TCP-MIB): At line 0 in (none) Cannot find module (UDP-MIB): At line 0 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 0 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 0 in (none) Cannot find module (EtherLike-MIB): At line 0 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 0 in (none) Cannot find module (IPV6-ICMP-MIB): At line 0 in (none) Cannot find module (IPV6-MIB): At line 0 in (none) Cannot find module (IPV6-TCP-MIB): At line 0 in (none) Cannot find module (IPV6-UDP-MIB): At line 0 in (none) Cannot find module (UCD-IPFWACC-MIB): At line 0 in (none) Cannot find module (SNMP-TARGET-MIB): At line 0 in (none) Cannot find module (TUNNEL-MIB): At line 0 in (none) Cannot find module (IPV6-FLOW-LABEL-MIB): At line 0 in (none) Cannot find module (UCD-DISKIO-MIB): At line 0 in (none) Cannot find module (LM-SENSORS-MIB): At line 0 in (none) Cannot find module (UCD-SNMP-MIB): At line 0 in (none) Cannot find module (UCD-DEMO-MIB): At line 0 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 0 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none) Cannot find module (IP-FORWARD-MIB): At line 0 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none) Cannot find module (SNMP-MPD-MIB): At line 0 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none) Cannot find module (SNMPv2-TM): At line 0 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 0 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 0 in (none) Cannot find module (UCD-DLMOD-MIB): At line 0 in (none) device `hpaio:/usb/HP_LaserJet_MFP_M426fdn?serial=PHBLK7J3T1' is a Hewlett-Packard HP_LaserJet_MFP_M426fdn all-in-one device `hpaio:/net/HP_LaserJet_MFP_M426fdn?ip=10.4.129.139' is a Hewlett-Packard HP_LaserJet_MFP_M426fdn all-in-one
С офисным МФУ HP M426fdn проблему решили. Спасибо Андрею Черепанову. Помогло обновление hp-lib. Но хочу обратить внимание, что на Альт 8СП это не требовалось. Все работало "из коробки". (пользователя необходимо было добавить в группу lp)
